This is a marking template for the standardised drilling for the individual tactile studs with stem.The template comes as a set of 2 plates, each plate 300x425mm with 44 drill-holes in grid pattern.The template is positioned and taped to the substrate to avoid movement while drilling.
Installation On Concrete,Bitumen
Template is placed position and secured with tape.The correct depth of tactile stem is drilled,template removed and vacuumed up.A two-component resin is applied inside the holes,the stud is inserted into the holes and knocked in to secure with a rubber mallet
Installation On Timber
The holes are drilled as above,but a wood-metal neoprene adhesive is applied inside the holes and the surrounding surface of the hole in order to provide fixation for stem and the underside of the tactile stud with the substrate.The stud is then placed into hole and knocked in to secure with a rubber mallet.
*(The above installation information is general in nature and provided in good faith.The company does not not take legal responsibility for the use of the above information by any persons or entities, or 3rd parties.)
